PIONEER MIGHTY GASKET RTV BLACK

Pioneer Mighty Gasket RTV Black Resists high temperatures from -62ºC to 316ºC (for intermittent use). Guaranteed leakproof, strong, extremely durable, and permanently flexible. Replaces and outperforms conventional rubber, cork, paper, felt, and asbestos gaskets. Resistant to water, oil, battery acid, transmission fluid, and other chemicals.

Available in : 15g, 30g and 85g tubes in blister packs

Category:

Description

ABOUT PRODUCT

Pioneer Mighty Gasket Black is a ready-to-use 100% RTV, one component acetoxy silicone sealant which cures to a tough, rubbery solid when exposed to moisture in the air at room temperature. It has superior temperature resistance and outstanding weatherability. It is used for general glazing and sealing applications.

KEY FEATURES

  • Leakproof, strong, extremely durable and permanently flexible.
  • Fully cured Mighty Gasket Black is Heat Resistant for extended periods at temperatures up to 232ºC and for shorter periods up to 260ºC.
  • Replaces and outperforms conventional rubber, cork, paper felt and asbestos gaskets.
  • Adheres to clean metal, glass, plastic surfaces, silicone rubber, ceramic, granite and most types of woods.
  • Resistant to water, oil, battery acid, transmission fluid and other chemicals.
  • High tolerance to vibration and pressure.
  • Resistant to aging.
  • Fills all voids and spaces.

APPLICATIONS

  • Used on small engines (cars and motorcycles)
  • Radiators with a temperature that reaches 260ºC
  • Motorcycle cylinder and valve covers

APPLICATION PROCEDURE

Surface Preparation: Thoroughly clean and degrease metal and plastic surfaces, then rinse all surfaces, except plastic, with acetone. Rubber surfaces should be roughened with sandpaper, then wiped with acetone. Follow the precautions given on solvent container label.

Method:

  1. Remove cap and puncture tube membrane with the cap’s pin.
  2. Insert nozzle (cut tip for desired bead size) if available.
  3. Apply Mighty Gasket Black to the prepared surface in a uniform bead thickness in less than 5 minutes. In cases where Mighty Gasket Black is used between two surfaces, put the second surface in place using enough pressure to displace the air. Let the unit stand undisturbed at room temperature to cure.
  4. Tool off excess sealant.
  5. Wipe sealant off the nozzle or tube and put on the cap tightly.
  6. Store tube away from direct sunlight or sources of heat, water and other chemicals.