Description
ABOUT PRODUCT
Pioneer Non Sag Epoxy is a two-component adhesive with a non-owing consistency, making it very suitable for adhesive and sealant/gap filler applications in boat building. Its non-sag quality allows it to perform well on vertical or overhead applications with a maximum thickness of 1⁄2 inch.SURFACE PREPARATION
Surface contaminants such as dirt, grease, oil or wax must be removed from areas to be joined. Clean surfaces by sanding, sandblasting or brushing for stronger bonds. Surfaces should be clean and ready for application before the adhesive is mixed.DIRECTIONS FOR USE
- Apply mixed compound with a putty knife or spatula on one or both faces of glue joints.
- Join surfaces with sufficient pressure to ensure complete contact.
- Allow to cure or to harden.
- Unnecessary handling should be avoided until cure is complete. On its uncured state, scrape off excesses from edges or joints or immediately spread out the mixture on surfaces to be settled, filled or
patched.
PACKAGING
| SKU | Packaging | Weight of set, KG | Quantity per box |
|---|---|---|---|
| Quart set | Tin | 2.80 | 6 sets |
| Pint set | Tin | 1.43 | 12 sets |
| 1/2 Pint set | Tin | 0.71 | 24 sets |
| 1/4 Pint set | Tin | 0.29 | 50 sets |
